Smithco Sand Star I 45-001 Parts & Service Manual - Manual (Page 88)

B-17
Center Attachment
45-008 SAND CULTIVATOR WITH SPRING TINES PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 HHP-18 Bridge Pin 1 /
8
3
2 HCP-12-200 Clevis Pin ½ x 2 2
3 45-137 Center Lift Bar 1
4 HNTL-516-18 Lock Nut 5 /
16
- 18 12
5 42-177 Spring Holder 12
6 42-122 Rake Spring 12
7 HB-516-18-100 Hex Bolt 5 /
16
- 18 x 1 12
8 HCP-58-250 Clevis Pin 5 /
8
x 2½ 1
INSTALLATION INSTRUCTIONS
1. Springs (Ref 6) should be bolted to the center lift bar (Ref 3) with the spring holder (Ref 5) between center
lift bar and the spring. Bolt in place with 5 /
16
- 18 x 1 bolt (Ref 7) and lock nut (Ref 4).
2. Attach the center lift bar to main frame using (Ref 1 and 2) clevis pin and bridge pin.
3. Lift center lift bar up or extend cylinder so rod end lines up with the holes on the center of the attachment
lift. Use clevis pin and bridge pin (Ref 8 and 1) to fasten cylinder to sand cultivator.
4. Turn machine on and test for proper operation.