Smithco Sand Star I 45-001 Parts & Service Manual - Manual (Page 71)

69
Accessories
45-016 LIGHT KIT PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 17-537 Square U-bolt 2
2 45-081 Light Bar 1
3 34-201 Light 3
4 45-004 Roll Bar Kit 1
5 43-505 Light Wire Harness 1
INSTALLATION INSTRUCTIONS
45-004-K Smithco Engineered Roll Bar Kit is required for Light Kit on all Sand Star Machines.
1. Mount lights to light bar. Outside two facing forwards and center light facing to the rear.
2. Using the square u-bolts, mount light bar assembly to the roll bar.
3. Tighten u-bolts down and make sure light bar and lights are secure.
4. Tighten all hardware.
5. Center toggle switch is wired for lights via the main machine wire harness. The plug for the light wire
harness is zip tied to the left rear post (Ref 5). Hook light wire harness from lights to the plug on the left
rear post.
6. Use the tie straps provided to secure the light wire harness to the roll bar and the light bar.
7. Test lights.