Smithco Sand Star I 45-001 Parts & Service Manual - Manual (Page 69)

67
Accessories
45-004 SMITHCO ENGINEERED ROLL BAR PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 HB-716-14-100 Bolt 7 /
16
- 14 x 1 2
2 HNTL-716-14 Lock Nut 7 /
16
- 14 8
3 HB-716-14-125 Bolt 7 /
16
- 14 x 1 1 /
4
6
4 45-082 Seat Belt Brace 1
5 76-198-03 Seat Belt 1
6 45-060 Roll Bar 1
7 HB-716-14-150 Bolt 7 /
16
- 14 x 1 1 /
2
2
INSTALLATION INSTRUCTIONS
The Following instructions apply to all Sand Star Machines.
1. Line up the mount plate on the roll bar to the square mounting plate by the seat, with the bend in the roll
bar toward the rear of the machine.
2. Place four 1-1/4" bolts in the right mount plate holes and tighten. Place two 1-1/4" bolts on left rear and
two 1-1/2" bolts on left front. Bolts are longer in the left front to accommodate remote air cleaner option.
3. If your machine has a remote air cleaner you will have to remove the 2 bolts holding the air filter mount.
Place the roll bar on top of the air filter mount. Replace bolts and tighten down.
4. Mount seat belts onto seat belt brace using 1" bolts. The strap goes on the right side and the lock goes
on the left side.
5. Tighten all hardware.