Smithco Sand Star I 45-001 Parts & Service Manual - Manual (Page 86)

B-15
Center Attachment
45-006 SAND CULTIVATOR PARTS LIST
REF# PART# DESCRIPTION QTY
1 HHP-18 Bridge Pin 1 /
8
3
2 HCP-12-200 Clevis Pin 1 /
2
x 2 2
3 45-116 Center Lift Bar 1
4 HNTL-38-16 Lock Nut 3 /
8
- 16 10
5 42-038 Tine Segment 5
6 HB-38-16-100 Bolt 3 /
8
- 16 x 1 10
7 HCP-58-250 Clevis Pin 5 /
8
x 2 1 /
2
1
INSTALLATION INSTRUCTIONS
1. Tine segments (Ref 5) should be bolted to the center lift bar (Ref 3). Use the 3 /
8
- 16 x 1 bolt (Ref 6) and
lock nut (Ref 4).
2. Attach the center lift bar to main frame using (Ref 1 and 2) clevis pin and bridge pin.
3. Lift center lift bar up or extend cylinder so rod end lines up with the holes on the center of the attachment
lift. Use clevis pin and bridge pin (Ref 7 and 1) to fasten cylinder to sand cultivator.
4. Turn machine on and test for proper operation.