Skutch Electronics AS-816 - Manual (Page 4)

Al Sandige Page 4 12/05/01
Connector
cable pins
PORT pin assignments
RING RING RING
PRIMARY STRIPE PIN
COLOR COLOR NUMBER
Blue White 1
Orange White 2
Green White 3
Brown White 4
Grey White 5
Blue Red 6
Orange Red 7
Green Red 8
Brown Red 9
Grey Red 10
Blue Black 11
Orange Black 12
Green Black 13
Brown Black 14
Grey Black 15
n/c n/c 16
n/c n/c 17
Green Yellow 18
Brown Yellow 19
Grey Yellow 20
Blue Purple 21
Orange Purple 22
Green Purple 23
Brown Purple 24
Grey Purple 25
TIP TIP TIP
PRIMARY STRIPE PIN
COLOR COLOR NUMBER
White Blue 26
White Orange 27
White Green 28
White Brown 29
White Grey 30
Red Blue 31
Red Orange 32
Red Green 33
Red Brown 34
Red Grey 35
Black Blue 36
Black Orange 37
Black Green 38
Black Brown 39
Black Grey 40
n/c n/c 41
n/c n/c 42
Yellow Green 43
Yellow Brown 44
Yellow Grey 45
Purple Blue 46
Purple Orange 47
Purple Green 48
Purple Brown 49
Purple Grey 50
Operation
In normal operation, the AS-816 will route a
port to the first available CO line whenever the port
requests a line (goes "OFF HOOK"). When a port
finishes the call (goes "ON HOOK"), the AS-816
will do the following:
! Immediately drop the CO line the port
was using,
! Disconnect the port from that CO line,
! Either, disable the port, if in an overflow
condition, or start looking for that port
to request another line, if not in an
overflow condition, and
! Wait two seconds before making that CO
line available again.
Once the last available line has been assigned to
a port, the AS-816 will go into an overflow
condition. In an overflow condition, the unit will
disable, cut the "Talk Battery", from all ports that
currently are not connected to a CO line. During an
overflow condition, the AS-816 will disable a port
after that port finishes its call. The overflow
condition is cleared when any CO line becomes
available (2 seconds after a port finishes its call, the