Skutch Electronics BA-704 V3.00 - Manual (Page 2)

Introduction
Thank you for purchasing the Skutch BA-704 Promotion-On-Hold
Adapter. This unit allows all phones connected to your phone lines to
provide Promotion-On-Hold to your customers. The BA-704 can be
installed on any telephone you wish. Once installed, all phones can
access the BA-704 unit. To place a call on hold, simply press the
STAR Touch Tone button on your telephone, then press the HOLD
button on the telephone. The On-Hold call can be answered at any
phone. Pick up the line and press the STAR Touch Tone button to
disable the music. The BA-704 is simple to use and is compatible with
almost every make and model of telephone.
Installation
Operation
To place a call on-hold -Simply press the STAR Touch Tone
button on your telephone, then press the HOLD button on the
telephone.
To release the hold condition - Pick up any phone that is
connected to that line, and press the STAR Touch Tone button on the
telephone.
Lights on the BA-704
STEADY ON- Indicates that the promotion-on-hold music is
connected to the telephone line.
POWER UP- On initial power up, all four lights will flash for
approximately three seconds.
Tech Support (916) 786-6186
If you are unable to get your BA-704 operational, feel free to call for
technical support. Technical support is available from 7:30 AM to 4:30
PM Pacific Time, Monday – Friday.
1 = Normal Mode (Default)
2 = Hold Key Mode
4 = Short Touch Tone Detect –50ms- (Default)
5 = Long Touch Tone Detect –76ms-
7 = Tone Mute Off
8 = Short Tone Mute –750ms-(Default)
9 = Long Tone Mute –1.4 Sec-
* = STAR to Activate (Default)
0 = Load All Defaults
# = POUND to Activate
Press and hold corresponding tone for 10 full seconds. Audio pulsates
3 times as confirmation.