Skutch Electronics EX-100 - Manual (Page 3)

Page 3
The Midi “Control Change” command, which consist of three consecutively transmitted bytes, is used
to control DMX channels 128-255. The format is as follows:
Note ON
Note ON
DMX Channel
(01-7F)
DMX Channel
(1-127)
Brightness
00= OFF
3F = 50% ON
7F= 100% ON
Brightness
0= OFF
63= 50% ON
127= 100% ON
9x 03 7F
143+x 3 127
In Hex
In Decimal
Midi Channel (0-F)
Midi Channel (1-16)
Midi Command for DMX Channels 1-127
[For Channels 1-16]
Control Change
Control Change
d=DMX Channel
(80h-0ffh)
d=DMX Channel 128-255
Brightness
00= OFF
3F = 50% ON
7F= 100% ON
Brightness
0= OFF
63= 50% ON
127= 100% ON
Bx d-80h 7F
175+x d-128 127
In Hex
In Decimal
x=Midi Channel (0-F)
x=Midi Channel (1-16)
Midi Command for DMX Channels 128-255
[Channels 1- 16]