Sim2 Teatro 80 - Manual (Page 30)

4
TEATRO 80 MB
APP.3 INSTALLATION HINTS (HORIZZONTAL - VERTICAL SHIFT)
To install the TEATRO 80MB system correctly place the projector so that the projected image completely fills the screen.
Ideally, to avoid image distortion, the projector should be positioned perfectly perpendicular to the projection screen, as
shown in the figure below. The centre of the projection lens should be lined up with the centre of the projection screen.
CAUTION:
The examples shown in the figure give only general indication on the use of the vertical shift. Each projection
lens may require differing vertical shift settings. For more detailed information, see the technical specifications
or contact an authorised SIM2 Multimedia centre.
Screen center = 0
Screen
Height
Screen center = 0
Screen
Height
+70% Vertical Shift
-30% Vertical Shift
+/- 15% Horizontal Shift
Screen center = 0
Screen
Width
+15% TILT
0% TILT
- 15% TILT
1
2
3
4
TEATRO 80 MB - APPENDICE.indd 4 25/10/10 18.17