Sim2 Teatro 80 - Manual (Page 13)

12
TEATRO 80 - M80
TYPE OF IP ADDRESS
This screen permits you to select the type of IP address to
be assigned (Fig. 15):
1. Static IP: the IP address, network SUBNET and GATE-
WAY must be entered manually.
2. Dynamic IP (DHCP): choose this option if you want the
projector IP address to be automatically assigned by
the network DHCP server (in most networks the DHCP
server is a router).
REMOTE CONTROL
In order to control the projector by TCP/IP protocol, you
must specify the TCP port to which the connection must be
made (called TCP socket). Choose the port number and set
“Port 1”.
If you want to establish a connection with the projector
via the Internet, the port chosen for remote connection
must be accessible from outside (usually a Virtual Server
is created in the network router to make the projector’s IP
address accessible from a Personal Computer connected
to the Internet).
SAVING SETTINGS
Go to “SAVE CHANGES” to enable the chosen setup (wait
for completion of the save procedure).
RESTORING SETTINGS
To restore the projector’s network setting to the default
factory setting click on “Restore”. Wait for completion of
the restore procedure.
Modo de Dirección IP
Interfaz Web
Control Remoto
Dirección IP: 172.031.127.055
Máscara de Subred: 255.255.000.000
Gateway: 172.031.045.115
Nombre Servidor DHCP: sim2prj
Puerto: 08080
Contraseña:: XXXX
Puerto1: 10001
Puerto2: 30704
IP Estática IP Dinámica (DHCP)
Aplicar configuración
Ajustes de fábrica
EMAIL SETTINGS
This screen is used to define the operating parameters for
notification of the projector status by e-mail (Fig. 16).
• Enabled: notification service by email is enabled.
• Disabled: notification service by email is disabled.
Domain name, SMTP Mail Server: parameters to be entered
according to the specific network settings to which the
HT5000HB - PRO5000DL projector is connected.
N.B. After setting the network parameters you must
turn off the projector using the network button.
Configuración de email
IP de servidor de correo electrónico:
172.031.127.066
Nombre de Dominio:
IP de servidor de correo electrónico:
Puerto SMTP:
00025
Dirección de Destinatario:
[email protected]
Activado Desactivado
Aplicar configuración
Ajustes de fábrica
Fig. 15
DESCRIPTION OF THE NOTIFICATION MAIL SENT BY
THE PROJECTOR
If the email notification service is enabled, the projector will
automatically send an email to the specified address when
the following circumstances occur:
Cooling fan error (Error Code 1)
Temperature too high (Error Code 2)
Lamp error (Error Code 3)
Communication error (Error Codes 4 e 5)
Email sender: “CCCCCCCCCCCCCCCCCCCExxx”
C: serial code of the projector sending the
notification
X: error code
Email subject: “WWWWWLLLLLFFFFFFXXXYYY#
Fig. 16
TEATRO 80 MB - EN.indd 12 25/10/10 18.02