Sensoray 425 - Manual (Page 3)

Page 1 Sensoray Model 425 Instruction Manual
Limited Warranty
Sensoray Company, Incorporated (Sensoray) warrants
the Model 425 hardware to be free from defects in
material and workmanship and perform to applicable
published Sensoray specifications for one year from
the date of shipment to purchaser. Sensoray will, at its
option, repair or replace equipment that proves to be
defective during the warranty period. This warranty
includes parts and labor.
The warranty provided herein does not cover
equipment subjected to abuse, misuse, accident,
alteration, neglect, or unauthorized repair or
installation. Sensoray shall have the right of final
determination as to the existence and cause of defect.
As for items repaired or replaced under warranty, the
warranty shall continue in effect for the remainder of
the original warranty period, or for ninety days
following date of shipment by Sensoray of the repaired
or replaced part, whichever period is longer.
A Return Material Authorization (RMA) number must
be obtained from the factory and clearly marked on the
outside of the package before any equipment will be
accepted for warranty work. Sensoray will pay the
shipping costs of returning to the owner parts which are
covered by warranty.
Sensoray believes that the information in this manual is
accurate. The document has been carefully reviewed
for technical accuracy. In the event that technical or
typographical errors exist, Sensoray reserves the right
to make changes to subsequent editions of this
document without prior notice to holders of this
edition. The reader should consult Sensoray if errors
are suspected. In no event shall Sensoray be liable for
any damages arising out of or related to this document
or the information contained in it.
EXCEPT AS SPECIFIED HEREIN, SENSORAY
MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, AND SPECIFICALLY DISCLAIMS ANY
WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
CUSTOMER’S RIGHT TO RECOVER DAMAGES
CAUSED BY FAULT OR NEGLIGENCE ON THE
PART OF SENSORAY SHALL BE LIMITED TO
THE AMOUNT THERETOFORE PAID BY THE
CUSTOMER. SENSORAY WILL NOT BE LIABLE
FOR DAMAGES RESULTING FROM LOSS OF
DATA, PROFITS, USE OF PRODUCTS, OR
INCIDENTAL OR CONSEQUENTIAL DAMAGES,
EVEN IF ADVISED OF THE POSSIBILITY
THEREOF.
Special Handling Instructions
The Model 425 circuit board contains CMOS circuitry
that is sensitive to Electrostatic Discharge (ESD).
Special care should be taken in handling, transporting,
and installing the 425 to prevent ESD damage to the
board. In particular:
• Do not remove the circuit board from its protective
antistatic bag until you are ready to configure the board
for installation.
• Handle the circuit board only at grounded, ESD protected
stations.
• Remove power from the ISAbus before installing or
removing the circuit board.