Seaward 200 PrimeTest - Manual (Page 27)

9.7.7 Lift one end of the defective fuse out of the fuse holder with the help of
a flat bladed screwdriver.
9.7.8 Lift the defective fuse completely out of the fuse holder.
9.7.9 Insert a new fuse as described and specified by the text on the battery
compartment cover.
9.7.10 Ensure that the new fuse is seated and centred in the fuse holder.
9.7.11 Relocate the battery cover over the battery compartment and fasten in
position with the battery cover captive screw.
9.8 Calibration.
To maintain the specified accuracy of the measurement results, the instrument
must be recalibrated at regular intervals by either the manufacturer or an
authorised Seaward Service Agent. We recommend a recalibration period of
one year.
9.9 Spare Parts.
Fuse 31.75mm x 6.35mm 0.5A 600V Type F Seaward Part No: 27B098
Fuse 20mm x 5mm 10A 250 V Type T Seaward Part No: 27B106
Test Leads (with alligator clips) Seaward Part No: 44B090
Carry Case Seaward Part No: 71G082
PrimeTest 200
Operating Instructions
17