Scotsman NME954 - Manual (Page 5)

NME954 & FME1204
June 2006
Page 5
FOR THE INSTALLER: Location
A proper installation locates the machine indoors,
but in a place where the heat and noise it
produces are not objectionable.
Air cooled machines discharge hot air out the
back. A minimum of 6" of space must be allowed
at the back and sides for adequate operation of an
air cooled unit.
Space for maintenance access is also important. If
two units are placed side by side on a bin, side
access becomes even more important.
A 6" space above the machine is needed to
remove the auger. Airflow Change:
Air flow through air cooled models changed in
2006 from in the front and out the back to in the
sides and and out the back. Units with
non-louvered panels flow in the sides and out the
back.