Scotsman NME954 - Manual (Page 17)

1. The bin control uses devices that sense light,
therefore they must be kept clean enough so that
they can “see”. At least twice a year, remove the
bin control sensors from the base of the ice chute,
and wipe the inside clean, as illustrated. 2. The ice machine uses a probe in the reservoir to
determine if there is water.
At least twice a year remove the
probe from the reservoir and wipe
the tip clean of mineral build-up.
NME954 & FME1204
May 2001
Page 17
Ice Level Sensors:
Slide To Remove
Clean The Ice
Level Sensors
SENSOR MAINTENANCE
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.