RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 34)

Inspector D4000
™ Laser SP
Operator
’s Guide
RJS, Minneapolis, MN 002-5572
A symbol is
“Acceptable” until any calculated bar width
deviation exceeds 100% of the tolerance for the
symbology decoded; for example:
Bar Width - Acceptable
-100% Tol. +100%
------RRARR+++++
Bar Width - Warning
-100% Tol. +100%
--------++RRRARR
Bar Width - Rejected
-100% Tol. +100%
--------+++++++R
“A” is out of
tolerance and off the screen.
Note:
Could also be on negative side (See Table 8-A for vis-
ual display of deviations)