RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 29)

Operator
’s Guide
Inspector D4000
™ Laser SP
002-5572 RJS, Minneapolis, MN 21
Table 7-B (Code Identifiers RJS Inspector D4000)
LOGMARS Code 39 symbology
AIAG B-1 Code 39 symbology
AIAG B 3/4/5/10 Code 39 symbology
Code 3 of 9 Code 39 symbology
HIBC 3 of 9 Code 39 symbology
3of9 W/43 Code 39 symbology
I 2 of 5 w/mod10 Interleaved 2 of 5 symbology
Std I2of5 Interleaved 2 of 5 symbology
ITF14 Case Code Interleaved 2 of 5 symbology
GS1-128 Code 128 symbology
Std 128 Code 128 symbology
X - Y % UPC-A Uniform Product Code, Ver. A
X - Y % UPCA+2 Uniform Product Code, Ver. A with 2 digit Add
X - Y % UPCA+5 Uniform Product Code, Ver. A with 5 digit Add
X - Y % UPC-E Uniform Product Code, Ver. E
X - Y % UPCE+2 Uniform Product Code, Ver. E with 2 digit Add
X - Y % UPCE+5 Uniform Product Code, Ver. E with 5 digit Add
X - Y % EAN-13 European Article Number 13 digit
X - Y % EAN13+2 European Article Number 13 digit with 2 digit Add
X - Y % EAN13+5 European Article Number 13 digit with 5 digit Add
X - Y % EAN-8 European Article Number 8 digit
X - Y % EAN8+2 European Article Number 8 digit with 2 digit Add
X - Y % EAN8+5 European Article Number 8 digit with 5 digit Add
Note:
On the previous tables, all ISO/ANSI symbologies use the
traditional specifications for bar width deviation.
X and Y represent the magnification range selected for
UPC/EAN tolerances.