RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 19)

Operator
’s Guide
Inspector D4000
™ Laser SP
002-5572 RJS, Minneapolis, MN 11
5.0 Main Menu Selections
5.1 Power On
When the unit is powered on, the following
“Ready”
screen will display after a few seconds:
D4000L Ver x.xx
Ready
x.xx = Current revision of the firmware
Press Enter and Select at the same time to bring up
the Main Menu:
Scan Setup
Storage Inactive
D4000L Ver.x.xx
x.xx = Current revision of the firmware
The selectable functions are: Scan, Setup and Stor-
age:

Press Select to choose an option.

Press Enter to initiate processing for that option.
Select Scan (from the Main Menu) to display the initial
Pass/Fail Analysis screen for the previously scanned
bar code.
5.2 Setup
Select Setup (from the Main Menu) to view various
system parameters:

Press Select to choose an option

Press Enter to initiate processing for that option