RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 16)

Inspector D4000
™ Laser SP
Operator
’s Guide
RJS, Minneapolis, MN 002-5572
3.2 RJS Inspector D4000 Description and Features
The RJS Inspector D4000 is an advanced technology
bar code verifier that makes it easy to decode bar code
symbols and to evaluate symbol compliance with
industry standards.
Features

Automatic power-on by pressing trigger

Scan bar codes on curved surfaces

GS1-128 data content validation

Auto-discriminates between many different
symbologies

Auto-print mode

Low battery indicator

Barcode symbol data and deviation displays

Multiple scan averaging

Power-down is automatic after short period of
disuse

Programmable, multi-scan analysis

Store and print capabilities

Visual and audible signals
Note:
The D4000 Laser SP is NOT a full ISO/ANSI
bar code verifier. It will ONLY inspect the
Decodability parameter (which will be accurate
when the Laser is held at the proper angle and
distance). If you need to comply with the
ISO15416 bar code quality standards then the
D4000 Auto Optic will be required.