RJS Inspector D4000 SP (FIRMWARE version A.06 and Later) - Manual (Page 32)

Inspector D4000
™ Laser SP
Operator
’s Guide
RJS, Minneapolis, MN 002-5572
8.2 Modulo Check Character
Press Select to bring up the next screen (if applicable):
Modck: 9 PASS
Expect:9
This display indicates (when applicable) the Modulo
check character decoded and the Modulo check
character that should have been decoded (expected) in
the symbol. PASS or FAIL is also indicated.
Note:
For Code 128, the mod check character (Mod 103) is
displayed as the symbology
’s character value (a nu
m-
ber from 000 to 102). One or two numeric Mod check
characters may precede the 3-digit Code 128 Mod
check described above. These digits represent the
Mod 10 check character(s) that can be included de-
pending on the format.
8.3 Symbol Specific Errors
Press Select to bring up the next screen:
90-115% UPC-A
Acceptable
Symbology type is indicated on the top row and the
analysis overview on the bottom row.