RGBLink VSP 198CVS Quick Start - Manual (Page 17)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
16
How to Realize LAN Remote Control Settings
Firstly, To realize LAN remote control need to build up a LAN platform including: ①One computer
(Laptop or computer, used to do remote control which installed windows control software in the
computer, please refer to software installing part for installation software).②One router (Better to have
wireless function which may realize WEB control cross different platform, without wireless function is
available but only realize cable remote control. No limitation for router ’s model and brand, such as VPN
router model: Netcore 255 or 266; Volans VE 760W or 982W). ③One VSP 198CVS processor (as long
as the router ’s network ports can connect to, user can place multi pieces of VSP 198CVS).
Step one: LAN physical connection. Connect VSP 198CVS and router with network cable, then connect
computer and router with network cable also, use the LAN port of router, LAN port is used for
connecting to outer net. Sketch map as below:
Step two: IP address setting (processor ’s default IP address is 192.168.0.100)
Firstly change computer ’s local connection to “automatically getting the IP”, showed as below: