How to realize test pattern output and settings – RGBLink VSP 198CVS Quick Start User Manual
Page 13
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
12
5. Push MENU, return to [TEXT OVERLAY], rotate the knob, choose BLEND LEVEL, and set the image
display transparency, regulating range between 0 - 16.
6. Push MENU, return to [TEXT OVERLAY], rotate the knob, choose the color value:
RED: The value range of color RED that to be set, regulating range between 0~255.
GREEN: The value range of color GREEN that to be set, regulating range between 0~255.
BLUE: The value range of color BLUE that to be set, regulating range between 0~255.
7. At the same time, you can view the effect through the screen, to get a better setting.
Note: All the above settings are available only for IMAGE B.
How to Realize Test Pattern Output and Settings
Test Pattern is used to calibrate the screen or system, especially when there is not standard input
measure instrument.
There are 66 kinds of test patterns for VSP 198CVS.
Push the MENU button and go into the menu items, turn the knob and go to
Push knob and go into the
Push knob and go into the PATTERN> option. FLAT COLOR: push knob and go into the menu, RED color range is from 0-255, GREEN is from 0-255, and BLUE is from 0-255. TEST PATTERN: Push knob and go into the menu items, there are 66 kinds of test patterns. If choose AUTO SWITCH, VSP 198CVS will output all the test patterns one by one, and the interval between is 1 to10S.