RGBLink MSP 211 User Manual - Manual (Page 4)

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 1
1.0 Safety
The proper use of power
The operating voltage for this product is 12V. This product is only
workable under correct power condition, which is already mark on
the back panel of the power.
High Voltage
There are many high voltage components inside.
Do not Remove Covers and Panels
Do not remove Covers in any conditions. There are not any spare
components inside for maintenance, so do not maintain this product
by userrselves, any requirement, please feel free to contact our
service engineer. Keep heavy device from power cord.
Grounding the Product and Use the Proper Fuse
This product is grounded through the grounding conductor of
the power cord. To Avoid electrical shock, plug the power cord into
a properly wired receptacle before connecting to the product input
or output terminals.
Keep away from Magnet, Motor, TV and Transformer.
Guard Against Damp
Keep using inside clean and dryness environment, once the
device get wet, must remove power cord right now.
Keep away Exploder
Do not operate the device inside dangerous and easy explosive
gas, which it may make fire, blast or something without
expectation.
Keep away Pour Liquid and Fragment
It is forbid to pour liquid, metal fragment or anything else inside
this device to avoid fire and other accident. Once that happens,
must remove power cord and try to make it clean before power on
again.