RGBLink MSP 211 User Manual - Manual (Page 11)

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 8
z How to use
User need to choose current small converter Model in the pull-down frstly.
Shown as below：
Fig. 4.9 MSP 211 “Choose Model”
Click” on” button to open the serial, The button will become
when serialis opened. User can click the “Close” button if user want to close the
serial.
Click this button can download user config (settings) on software into
MSP 211, but could not sync user config inside MSP 211 which by buttons.
Click this button can exit software.
z
Input
The device will automatically read and display the format of DVI input, as follows:
Fig. 4.10 MSP 211 Optional Pictures
z Output
DVI output interface is compatible with HDMI 1.3; HDMI interface is able to
embedded audio; If use DVI protocol, audio should go by additional CANNON to play.
Select “Output Mute” to make device mute.
Fig. 4.11 MSP 211 Optional Pictures