RGBLink MSP 211 User Manual - Manual (Page 13)

MSP 211 User Manual Doc No.：RGB-RD-UM-M211E001 10
② User can set Comm Port and Comm Speed (Baudrate) through “Comm setup”.
User can select current using serial port by the pull-down arrow. Comm Speed
should be 115200.
Fig. 5.3 MSP 211 Serial setting
Click” on” button to open the serial, The button will become .
Click this button can realize host computer software data sync with MSP
211.
Remark：When user change output format, SYNC should be started to make
device operate correctly, and this operation is saved to memory directly,
user do not need to do save operation seperately.
For other operations, please refer to the fourth part ③ Communication Software
Control Guide.