RGBLink Driver User Manual - Manual (Page 32)

5. System Setup and Operations
How to Control the Brightness of Sending Card
Driver User Manual 32
How to Control the Brightness of Sending
Card
The operation steps are as follows:
1. First, make sure the device is in normal operation.
2. Choose the brightness value according to actual need via UP/DOWN
buttons, the adjustment value range is 1~16 for Linsn and DBstar
Q2011 sending card, 0~16 for Colorlight sending card and 0~64 for
Nova MSD300 sending card. The higher the brightness value, the
brighter sending card will be.
Note: Brightness control for sending card is only available for Linsn,
Colorlight, DBstar Q2011 and Nova MSD 300 currently. But if Nova
sending card connected to PC software via USB, the key operation of
control brightness is invalid, though PC can still control the brightness,
user can only pull out the USB cable to recover the key brightness
controlling.