Research Concepts RC2000A - Manual (Page 50)

50 RC2000A Dual Axis Antenna Controller Chapter 5 Specifications
Chapter 5 SPECIFICATIONS
Inspect unit for any damage caused during shipping. If any exists, notify shipper immediately.
A. PHYSICAL
Size: 19.0" x 3.5"H x 9.0"D (Rack)
15.0"W x 3.5"H x 9.0"D (Desk)
Weight: 12.5 lbs.
Temperature: 0-50oC
Input Power: 115/230 VAC, 50/60 Hz., 48 W
B. DRIVE
Output: 12-36VDC, 8.0 Amps
280VA
Sensor Input: Reed, Hall Effect, Optical
Standard Polarization Interface:
Chaparral type polarotor servo
Optional Interfaces for Motorized Feeds with Potentiometer Feedback:
RC2KPOL: 20 volts DC at 500 milliamps
(the RC2KPOL option requires software version 1.50)
RC2KHPP: 5-40 volt DC output (output voltage set by potentiometer (P2) on the
RC2KHPP board), 3 amps at 40 volts DC, 400 milliamps at 5 volts DC
(the RC2KHPP option requires software version 1.51)
C. Azimuth and Elevation Drive Transfer Function (current vs. voltage)
See Figure A1 in Appendix.
D. Non-Volatile Memory Battery
Duracell DL2450
E. Drive supply lines are protected by circuit breakers. The AC input is protected by a 6 amp AGC
(fast-blow) fuse at both 115 VAC and 230 VAC.
Research Concepts, Inc. • 5420 Martindale Road • Shawnee, Kansas • 66218-9680 • USA www.researchconcepts.com