Rena Envelope Imager CS User Manual

Page 31

SECTION 3

OPERATING THE ENVELOPE IMAGER CS

When the Clean the Print Cartridge button is pressed the “Clean the Print Cartridge(s)” window appears
and prints the page below.

Clicking on the Intermediate Clean button will
present the screen on the right.

Clicking on the Prime button will take you to the
next level of cleaning if necessary. When the
cartridges are clean click on the Done button to exit
this routine.

The Display Ink Level button will show you an
approximation of the amount of ink remaining in the
cartridges. Click OK to exit this function.

Note: The following message may be briefly
displayed before the “Estimated Ink Level” window
opens. “The computer is unable to establish two-
way communication with the device”.
If this message appears for more than 30 seconds
then you may need to reboot your computer and
cycle printer power to re-establish a two-way
connection.

Clicking on the Print Cartridge Ordering
Information button will display a window with the
message “Please see user documentation”.

Please contact your local Rena Systems Dealer to
order supplies.
Cartridge Part

Black:

C6656

Tri-Color: C6657
Photo:

C6658