Rena Envelope Imager CS - Manual (Page 30)

SECTION 3
OPERATING THE ENVELOPE IMAGER CS
Service Tab
The Services tab allows you to perform maintenance
and check functions on the printer.
Clicking on the Print a Test Page button will print a sample
page on the printer, as shown.
Clicking on the Print a Diagnostic Page button will print a
nozzle test pattern, as shown.
This image can be used to visually verify the condition of the
ink cartridges. If all nozzles are firing, there will be no voids in
the grid patter lines.
If you see voids in the nozzle test image; use the “Clean the
Print Cartridge” button, described on the next page, to try to
clear the nozzles. If you still see voids in the image, after trying
to clean the print cartridges; you may need to replace the ink
cartridge(s) to achieve better print imaging results.
26