Remotec ZTS-100 V2.04 - Manual (Page 25)

Reset ZTS-100 to Factory Default Settings
Battery Low Indication
LCD indication Step Procedure / Description
Press and hold "Fan" + "Mode" keys for
2 seconds to entry the reset mode.
Press Up/Down key to toggle Yes/No
selection.
1
Press "Prog" key once to confirm the
action.
=> It will perform the reset if select "Yes"
or
=> It will back to home page if select "No".
LCD display done after reset to factory
default settings.
The following data will be reset to default:
1. Clock : 12:00am
2. Day: Mon
3. Temperature scale: F
4. Swing : 2F
5. Diff: 2F
6. Default schedule
7. Operation mode: OFF
8. Default Heat override set point
9. Default Cool override set point
10. Filter counter cleared
11. Delete from network
2
24
LCD indication Step Procedure / Description
ZTS-100 thermostat will detect the
battery level every 30 minutes;
Battery low icon will be displayed at
Home page if the battery is running out.
(User is required to change new
batteries.)
1
WAKE
AM
PROG ON
MO
HEAT
PUMP