Remotec ZTS-100 V2.04 - Manual (Page 21)

Important: It is not allow changing ZTS-100 operation mode by change of power
source. It is need to follow the above steps to change ZTS-100 operation mode.
Add (Inclusion) ZTS-100 to Gateway / Controller Z-Wave network
LCD indication Step Procedure / Description
Gateway / Controller device should entry
the inclusion mode.
Press and hold "Home" key for 2 seconds
to entry the Add (Inclusion) / Delete
(Exclusion) Mode.
1
Press "Prog" key once, it will search the
network.
2
If the ZTS-100 is added into the network,
the signal of "done" will be shown.
Inclusion is completed.
3
Press "Home" key once to go back to the
home page.
4
WAKE
AM
PROG ON
MO
COOL
FAN AUTO
20