REMKO WPM-Smart-Control-Manual for users-WKF-180 - Manual (Page 21)

"Settings" menu item - User
In this menu you can configure the settings. For example, you can adjust hot water and heating tempera-
tures or change time settings. The menu is opened with the key on the right. Pressing the left-hand key
allows you to jump up a level in the menu structure again. Pressing the left key multiple times always allows
you to return to the 3D house.
Pressing "OK" (right softkey) takes you to submenus of the menu item "Settings".
Level 2
menu item
Level 3 menu item Level 4 menu item Info
Basic set-
tings
Language / Time
Date
Level for the adjustment of the
current time and date. Basic
adjustment is implemented during
commissioning
New installation required after
more than 12 hours of electrical
power failure
Time
Date format
Time format
Language
Time zone
Display
Display brightness
Level for the adjustment parame-
ters of the display
Display contrast
Display off
Solar Storage tank (1) Solar set temp.
Adjustment value for the max.
temperature of the hot water
storage tank with solar charging
Hot water
Domestic water heating
Storage tank set temp.
Max. hot water temperature
during heat pump operation
Mode
Level for the optimisation of the
hot water preparation with solar
storage tank charging
Time programme A
Level for programming various
different timer programmes
(standard 05:00-23:00 hrs)
Time programme B
Time programme C
Tolerance during solar
mode
Parameter for optimising the
charging of the storage tank with
installed solar plant
Circulation
Circulation set temp.
Set temperature for temperature-
guided circulation pumps
Time programme
Level for programming a timer
program for the circulation pump
(standard 00:00-24:00 hrs)
Hygiene function (legion-
ella circuit)
Day of activation
Mon-Tue-Wed-Thu-Fri-
Sat-Sun
Activation day for the anti-legion-
ella function.
21