REMKO RVD 351 DC - Manual (Page 11)

The fan speed can be adjusted with this button. A selection can be made
between low, medium, high and automatic fan speed.
FAN SPEED button
▲ ▲
In ventilation mode, the air in the room is only circulated.
The room temperature cannot be changed in this mode.
The cooling or heating operation is not activated.
AIR CIRCULATION Mode
AIR CIRCULATION
MODE
FAN
SPEED
FAN
SPEED
FAN
SPEED
FAN
SPEED
FAN
SPEED
This button activates a programming function, which causes the
target temperature in cooling mode to increase after one hour by 1°C
and after two hours by 2 °C. In heating mode, the target temperature is
decreased after one hour by 1 °C and after 2 hours by 2 °C.
The display on the indoor unit goes out.
The TURBO function is used to activate the maximum fan speed
ECONOMIC
RUNNING
ECONOMIC
RUNNING
ECONOMIC RUNNING button
deactivated
The oscillating function of the air discharge fins can be adjusted with
this button. The air distribution in the room is improved with the swing
function. In order to adjust the aim of the air discharge fins to a particular
direction, the AIR DIRECTION button must be pressed briefly. In order to
activate the automatic swing function, the AIR DIRECTION button must
be pressed for longer than 2 seconds.
SWING and AIR DIRECTION Buttons
SWING SWING
deactivated
20
20
20
20
10:49
10:49
10:49
10:49
TEMP
TEMP
TEMP
TEMP
CLOCK
CLOCK
CLOCK
CLOCK
SPEED
SPEED
SPEED
SPEED
FAN
FAN
FAN
FAN
LOW
LOW
LOW
LOW
° C
° C
° C
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
LOW
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
AUTO
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
AUTO
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
AUTO
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
AUTO
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
AUTO
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
AUTO
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
LOW
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
MED
° C
2i
10:49 TEMP CLOCK
SPEED
HEAT
HIGH
° C
2i
10:49 TEMP CLOCK
SPEED
FAN
LOW
° C
2i
10:49 TEMP CLOCK
SPEED
FAN
MED
° C
11