REMKO ML 263 DC - Manual (Page 22)

SLEEP function
In this function, the unit automatically increases (in
cooling mode) or reduces (in heat mode) the tem-
perature in the first two hours by 1°C an hour. For
the next five hours, the temperature is them kept
constant. Then this function is stopped.
The function maintains the most comfortable tem-
perature while saving energy.
1
Fig. 24: "Sleep" function
The "SLEEP" function is only available in the
"Cooling", "Heating" and "Auto" modes.
Adjusting the airflow direction
Use the "SWING" and "DIRECT" keys to achieve
the desired airflow direction.
1. Press the "DIRECT" key to determine the
horizontal position of the exhaust fins. Each
time the "DIRECT" key is pressed, the fins
change position by 6 degrees.
2. Pressing the "SWING" key causes the
exhaust fins to move up and down automati-
cally.
If the fins are moved to a position which would
influence the cooling or heating effect of the air
conditioning unit, they change their direction of
movement automatically.
REMKO ML...DC
22