beautypg.com

Aser, Afety, Laser safety – Quantum Composers Jewel Laser User Manual

Page 5

background image

Jewel Manual v1.1 | Quantum Composers

Page 5

CAUTION: Risk of exposure to hazardous laser radiation.

ATTENTION: Risque d’exposition à un rayonnement laser dangereux.

ACHTUNG!: Gefahr durch gefährliche Laserstrahlung.

ATTENZIONE: Rischio di esposizione a pericolose radiazioni laser.

ADVERTENCIA: Riesgo de exposición a la radiaciόn peligrosa del láser.

LASER SAFETY

VISIBLE AND/OR INVISIBLE LASER RADIATION

CAUTION: The Jewel Laser is a Class 4 OEM laser. Its output beam is, by

definition, a safety and fire hazard. Precautions must be taken to prevent

accidental exposure to both direct and reflected beams.

Precautions for Safe Operation of Class 4 OEM Lasers:

DO NOT remove the protective covers from the Laser Head. No user serviceable

components are inside. Exposure to laser radiation when covers removed.

Avoid looking directly at the laser output beam.

Do not wear reflective jewelry while using the laser, as it might cause inadvertent

hazardous reflections.

Use protective eyewear at all times. Consult the ANSI, ACGIH, or OSHA standards listed

at the end of this section for guidance on goggles and safety matters.

Operate the laser at the lowest possible beam intensity, given the requirements of the

intended application.

Increase the beam diameter wherever possible to reduce beam intensity and thus reduce

the hazard.

Avoid blocking the laser beam with any part of the body.

Use an IR detector or energy detector to verify that the laser beam is off, before working in

front of the laser.

Establish a controlled access area for laser operation. Limit access to those trained in the

principles of laser safety.

Maintain a high ambient light level in the laser operation area so the eye pupil remains

constricted, thus reducing the possibility of hazardous exposure.

Post prominent warning signs near the laser operation area.

Provide enclosures for the beam path whenever possible.

Set up an energy absorber to capture the laser beam, preventing unnecessary reflections

or scattering.