Quantum Composers 9730 Series - Manual (Page 20)

8-20
TRIG Menu (TRIG)

Page0
o Line0 – empty
o Line1 – Mode: Disabled
o Line2 – empty
o Line3 – empty

Page0
– Alt
o Line0 – empty
o Line1 – Mode: Enabled
o Line2 – Level:
o Line3 – Edge:

Page1
o Line0 – empty
o Line1 – Filter: Disabled
o Line2 – empty
o Line3 – Source: Front Input, Rear Input

Page1 - Alt
o Line0 – empty
o Line1 – Filter: Enabled
o Line2 – MinWid:
o Line3 – Source: Front Input, Rear Input
Setting Trigger Parameters
Mode: Enables or disables external trigger operation.
Level: Sets the trigger threshold level.
Edge: Sets the triggering edge to rising or falling.
Filter: Enables or disables minimum trigger pulse width filtering.
MinWid: Sets the minimum allowable trigger pulse width.
Source: Sets the trigger input source to front panel or rear panel
Counter Menu (FUNC + 8)

Page0
o Line0 – empty
o Line1 – Counter: Disabled, Enabled
o Line2 – Counts: “system pulse count since reset”
o Line3 – CLR to zero counter.
Setting Counter Parameters
Counter: Enables or disables the T
0
pulse counter.
Counts: Returns the current value of the counter.
CLR: Pressing the CLR while in the Counter menu will reset the
Counts value to 0.