Quantum Composers 9730 Series - Manual (Page 13)

6-13

Channel Button Green LED back illuminating button text when the channel is
enabled.
Arm Switch (Keyed)
The upper right hand corner of the front panel contains a safety Arm Switch which may
be turned to the ‘STANDBY’ position while changing parameters to ensure no pulses
are generated
. This switch must be in the ‘ARM’ position in order to allow generation of
pulses.
NOTE: The Arm switch keys are included with the shipped
accessories .
System Status LED Indicators
The system state has two front panel LED indicators to reflect the current system state:

Power Green LED back illuminating button text when system is
powered on.

ARM Red LED indicating the system arm keyswitch is in the
“Arm”
position.

Trigger Green LED back illuminating button text when the global
system trigger is enabled.

Run Green LED back illuminating button text while system is
pulsing or ready to trigger.
Front Sync Output
The front panel sync output is user selectable to output the TTL representation of the
system pulse or any of the individual channels. This output may also be disabled.
Front Trigger Input
The front panel trigger input is user selectable as the source for the global system
trigger.