Quantum Composers 9730 Series - Manual (Page 17)

8-17
Channel Menu (A, B, C, or D)

Page0
o Line0 – Channel: Enabled, Disabled
o Line1 – Wid:
o Line2 – Dly:
o Line3 – decimal place indicator

Page1
o Line0 – ‘Enable’ Enabled, Disabled
o Line1 – empty
o Line2 – Brst:
o Line3 – Ampl:
Setting Channel Output Parameters
‘Enable’ Enables or disables the channel for pulsing.
Wid: Sets the channel pulsewidth.
Dly: Sets the channel delay until active edge.
Brst: Sets the burst count for the channel. When system is in
‘Single Shot’ mode, this parameter will display ‘(Disabled)’
and not be adjustable.
Ampl: Sets the amplitude of the output current pulse.
Offs: Sets the amplitude offset of the output current pulse.