Quantum Composers 9250 Series - Manual (Page 44)

9250 Manual Version 1.2 | Quantum Composers
44
Output Module
Output Impedance - 50 - Ohms
Output Level
3.3 – 5.0 VDC into ≥ 1K ohm
1.7
– 2.5 VDC into 50 ohm
Resolution - 20 - mV
Output Current
5mA typical into 1K ohm
50mA typical into 50 ohm
Rise Time (10% - 90%)
< 2ns typical @ 5V (High Imp)
< 1ns typical @ 2.5V (50 ohm)
Slew Rate 2 - - V/ns
Overshoot < 100mV + 10% of pulse amplitude
Communications
USB Standard – USB 2.0
BlueTooth Optional
Class Class II Radio
Output Transmitter Gain - 4 - dBm
Transmitter Sensitivity - -80 - dBm
Transmitting Range - 20 - Meters
Baud Rate - 115200 - bps
General
Dimensions 7.125” x 5.1” x 1.5” (18.1 x 13 x 3.8 cm)
Weight - 1 - lbs
Power
Voltage Input 4.75 - 5.25 VDC
Current Input 800 830
(3)
1,500
(4)
mA
Fuse
Internal current sense circuit incorporated. No external
fuse is provided.
Memory - 6 - Bins
Operation Temperature 0 - 40 Celsius
Storage Temperature -40 - 70 Celsius
(1)
The highest error in accuracy occurs when all channel delays are set to zero. Delay adjustments may be used
to lower the error accordingly.
(2)
The delay (rising edge) has the 5ps resolution while the width (falling edge) only has 4 ns resolution; thus, when
dynamically adjusting the delay, the width will only update in 2ns steps. This assures that the width accuracy specification
is still met.
(3)
Typical current input is defined as the current consumed when all 4 channels are pulsing into high impedance
loads at 5V, rate of 10Hz, 50% duty cycle, and with the Bluetooth option disabled.
(4)
Maximum current input is defined as the current consumed when all 4 channels are pulsing into 50 Ohm loads
at 5V, active low mode, and with the Bluetooth option enabled.