Quantum Composers 9250 Series - Manual (Page 23)

9250 Manual Version 1.2 | Quantum Composers
23
Recalling Custom Settings from a Bin
The 9250 series has the capability to recall any of the 6 custom user setups. If any of the
previously saved presets are to be recalled, click “Storage”, “Restore From Bin”, followed by
selecting the bin number to recall. Figure 6.8 represents the recalling process:
*Note: Selecting Default 0 will set the 9250 to factory default settings.
Figure 6.8 –9250 Application: Recalling From Bin
9250 Application Example
This example will demonstrate the proper 9250 application settings for a specific scenario.
The example will show how to output a single pulse on Channel-A upon receiving the rising
edge of every external trigger signal at 5V. The output will have an amplitude of 5V, pulse
width of 10ns, and 10ps delay present. Figure 6.9 on the following page demonstrates the
appropriate settings and corresponding values in which to be set.