Progressive Turf Equipment Pro-Max 36 - Manual (Page 32)

32
MAINTENANCE:
Turn tractor engine off before performing any maintenance.
Always use personal protection devices such as eye and ear protectors when
performing maintenance functions.
When completing a maintenance or service function,
make sure all safety shields are installed before placing the mower
in service.
BLADE SERVICING
:
Be sure safety locks are in place when working on decks in the raised position.
The tractor hydraulic system could fail, causing decks to fall and crush anything
under them.
Do not handle mower blades with bare hands. Careless or improper handling may
result in serious injury.
Inspect blades before each use to determine that they are mounted tightly and are
in good condition. Replace any blade that is bent, excessively nicked, worn or has
any other damage. Small nicks can be ground out when sharpening.
Only original equipment blades should be used when replacing worn-out mower
blades. They are made of special steel alloys and subjected to rigid heat-treating
and inspection requirements. Substitute blades may not meet these rigid
specifications and MAY BE DANGEROUS
.