Progressive Turf Equipment Pro-Max 36 - Manual (Page 31)

31
TRANSPORTING THE PRO-MAX 36 ONLY:
When transporting the Pro-Max 36 without the TD92 mower attached to the rear,
the castor wheel lockout bars must be installed.
The two lockout bars are stored on the front side of the crossbrace tube on the
main hitch frame.
Park the unit with the castoring transport tires turned to the rear and the tractor
straight to the machine. Disconnect the TD92 mower from the Pro-Max 36,
remove the connecting link and safety chains.
Using two 7/16” bolts, mount the lockout bar as shown below.
DISCONNECTING TD92 FROM PRO-MAX 36
The TD92 may be disconnected from the Pro-Max 36 for small mowing jobs
where the 36’ cutting ability of the Pro-Max 36 is not suitable.
Care should be taken in doing this. The procedure is the reverse of the hook up
instructions found in this manual.
IMPORTANT : the TD92 has its own critical drawbar dimensions as outlined
in the TD92 manual. These must be observed or damage to driveline components
will occur. The original safety cord from the TD92 must also be used.