Progressive Turf Equipment 522427 - Manual

1
February 2002
TD 92 ANTI SCALP ROLLER KIT INSTALLATION
CONTENTS OF KIT:
LEFT HAND CORNERS RIGHT HAND CORNER PINS
1. Use the Backing Plate and bolt it to the back of the Deck to use as a template for drilling the
17/32” mounting holes.
2. Align the plate up with the plate on the back of the mower. On the right hand side use the 4 –
½” washers as spacers to correct for the 3/8” flat bar.
Roller, Pin, Cotter Pin
Qty 6 of Each
Mounting Hardware
½” x 1 ¼ - Qty 10
½” x 1 ½ - Qty 2
½” Flat Washer Spacers
Backing Plate – Qty 4
Also Used for Drill Template
Mounting Bracket
Right Hand – Qty 3
Left Hand – Qty 3