Progressive Turf Equipment Pro-Max 36 - Manual (Page 19)

19
TD92 – HOOK UP TO Pro-Max 36:
1. With the transport wheel locked on the Pro-Max 36, back up to within 12” of
the TD92 mower.
2. Remove the sliding drawbar lock pin and slide the drawbar out and connect to
TD92.
3. Replace the sliding drawbar lock pin in bushing.
4. With TD92 frame still on the jack, back the unit up slowly and lock pin will
fall into place. Replace the hair pin.
5. Connect the PTO shaft, hydraulics and deck lock release rope for the TD92
mower.
Drawbar
Lock Pin