Progressive Turf Equipment Pro-Max 36 - Manual (Page 26)

26
DECK POSITION BUSHING:
This spacer bushing can be mounted on either side of the wing deck swivel.
Bushing shown mounted on the inside, positioning the wings out as far as
possible. This will give maximum cutting width.
Moving the bushing to the outside will increase the deck cutting overlap and
reduce the overall cutting width. This will, however, reduce the width of the
uncut strip when making turns. This position will be used when mowing while
following a pivot track.
TIRES:
Upon receiving your mower, check air pressure in the tires and adjust
according to specifications.
TIRE TYPE RECOMMENDED TIRE
PRESSURE (PSI)
MOWER DECK TIRES
(CASTORS)
24 PSI
MAIN FRAME TIRES 32 PSI
Never inflate tires beyond 35 pounds per square inch to seat beads. Inflation
beyond 35-PSI pressure before seating the bead may break the bead or even the
rim with explosive force. If beads have not seated by the time the pressure has
reached 35 PSI, deflate the assembly, move tire to another position on the rim and
re-lubricate. Inflate tire and inspect both sides of the tire to be sure beads are
Spacer
Bushing