Canon POWERSHOT SX201S - Manual (Page 66)

66
Once you compose the shot, such as for a group photo, press the shutter
button, and enter the composition, the camera will take three shots in a row
two seconds after it detects your face (p. 82).
Choose
".
● Follow Step 2 on p. 65 and choose ".
Compose the shot and press the
shutter button halfway.
● Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
X The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
X The lamp will blink and the self-timer
sound will play.
Join the subjects and look at the camera.
X When the camera detects a new face, the
lamp and sound will speed up (the lamp
remains lit when the flash will fire), and
two seconds later the shutter will release.
X The second and third shots will continue in
succession.
● To restore the original setting, choose
in Step 2 on p. 65.
Even if your face is not detected after joining the subjects, the shutter will release
approximately 30 seconds later.
For the screen in Step 1, press the n button, then press the qr buttons
or turn the  dial to change the number of shots. Press the m button to
accept the setting.
Using the Face Self-Timer
What if a face is not detected?
Changing the number of shots
CO
PY