Orion System System Manager TS II In-House - Manual (Page 31)

SMTS II Technical Guide
VCM & VCM-X Controllers
31
Setpoints for Unit 0102 Configuration
Outside Airflow Sensor Installed
Return Airflow Sensor Installed
Supply Airflow Sensor Installed
Airflow
Ebtron Sensors
Paragon Sensors
Figure 48: VCM-X Confi guration Screen 14
Figure 47: VCM-X Confi guration Screen 13 Figure 46: VCM-X Confi guration Screen 12
VCM & VCM-X Confi guration
Carbon Dioxide Sensor Scaling
If you have a CO
2
sensor installed on your system, select whether it is a
current (4-20 mA) sensor or a voltage (0-10 VDC) sensor. If you have
a communicating CO
2
sensor, select Voltage Sensor.
Refrigerant
Select whether your HVAC unit is using R-22 or R-410A refrigerant.
Airfl ow
Select each type of airfl ow sensor that you have installed on your system.
Type of Monitoring Station
Touch the radio button to select the type of airfl ow monitoring station:
 
EBTRON Sensors —Select this item if using an Ebtron or
Greentrol Airfl ow Monitoring Station.
 
Paragon Sensors —Select this item if using a Paragon
Airfl ow Monitoring Station.
Revised 4/21/15