Orion System System Manager TS II In-House - Manual (Page 13)

SMTS II Technical Guide
Navigation
13
Main Screen Icons and Button Functions
VAV/Zone Setpoint Buttons
The VAV/Zone Setpoint Buttons are located at the bottom of the VAV/
Zone Setpoints Screen. See Table 5 for a list of the Setpoint buttons and
their functions. Level 1 and Level 2 users can view these screens and
change occupied heating and cooling setpoints, but only a Level 3 user
can change all setpoints.
Button Function
Temps
The
< Temps> button, located at the bottom
the controller’s Setpoints Screen, takes you
directly to the controller’s Temperature Setpoints
Screens.
Damper
The
< Damper/Airfl ow> button, located at the
bottom of the controller’s Setpoints Screen, takes
you directly to the controller’s Damper/Airfl ow
Setpoints Screens.
Alarms
The
< Alarms> button, located at the bottom
of the controller’s Setpoints Screen, takes you
directly to the controller’s Alarm Settings Screen.
Misc
The
< Misc> button, located at the bottom
of the controller’s Setpoints Screen, takes you
directly to the controller’s Miscellaneous
Setpoints Screen.
Calibrate
The
< Calibrate> button, located at the bottom
of the controller’s Setpoints Screen, takes you
directly to the controller’s Calibration Setpoints
Screen.
Config
The
< Confi g> button, located at the bottom
of the controller’s Setpoints Screen, takes you
directly to the controller’s Confi guration Setpoints
Screens.
Table 5: VAV/Zone Setpoint Icons
VCM, VCM-X & VCB-X Setpoint Buttons
The VCM, VCM-X & VCB-X Setpoint Buttons are located at the bot-
tom of each controller’s Setpoints Screen. See Table 4 for a list of the
Setpoint buttons and their functions. Level 1 and Level 2 users can view
these screens and change occupied heating and cooling setpoints, but
only a Level 3 user can make changes to all setpoints.
Button Function
Temps
The
< Temps> button, located at the bottom
of the controller’s Setpoints Screen, takes you
directly to the controller’s Temperature
Setpoints Screens.
Static
The
< Static> button, located at the bottom
of the controller’s Setpoints Screen, takes you
directly to the controller’s Static & Air Setpoints
Screens.
Staging
The
< Staging> button, located at the bottom of
the controller’s Setpoints Screen, takes you
directly to the controller’s Staging Delays
Screens.
Misc
The
< Misc> button, located at the controller’s
Setpoints Screen, takes you
directly to the controller’s Miscellaneous Set-
points Screens.
Relays
The
button, located at the bottom
of the controller’s Setpoints Screen, takes you
directly to the controller’s Outputs Screens.
Config
The
< Confi g> button, located at the
controller’s Setpoints Screen, takes you directly
to the controller’s Confi guration Screens.
Table 4: VCM, VCM-X & VCB-X Setpoint Icons