Orion System MUA II D Controllers Operator Interfaces - Manual (Page 19)

Operator Interfaces
Technical Guide
19
Status Screen 8-27
MUA II vx.xx IDxxxx
Fan Relay : OFF
Cool Stage1 : OFF
Heat Stage1 : OFF
Line 2 - Current Supply Fan Relay Status
The letters FRC will appear before the colon if this
relay is in a force mode.
Line 3 - Current Configurable Relay Status
Description of relay and what it is configured for and it’s
current status. The letters FRC will indicate the relay is
forced to its current condition.
Line 4 - Current Configurable Relay Status
Description of relay and what it is configured for and it’s
current status. The letters FRC will indicate the relay is
forced to its current condition.
Status Screen 28
MUA II vx.xx IDxxxx
NO ALARMS
Line 2 - Blank Line.
Line 3 - NO ALARMS is displayed if none detected. If there are
one or more alarms active, the possible messages are
shown below:
NO SUPPLY SENSOR
BAD OUTDOOR AIR TEMP
NO RELATIVE HUMIDITY
FAN PROVING ALARM!
LO SUPPLY AIR ALARM!
HI SUPPLY AIR ALARM!
Line 4 - Blank Line.
Scheduling
The MUA II D controller scheduling screens are accessed by pressing
the “Schedule” button on either the System Manager or the Modular
Service Tool. Press the number button for the scheduling function you
wish to view. All Scheduling, Holiday Functions, Schedule Overrides,
Time & Date Functions and Alarm Search Functions are identical to
these functions as detailed in the scheduling portion of this manual. See
pages 10 through 11 of this manual for complete information in regards
to programming these functions for the MUA II D controller.
1)Schedule Overrides
2)Week Schedules
3)Holidays
ESC) Exit Menu