Orion System MUA II D Controllers Operator Interfaces - Manual (Page 18)

Technical Guide
Operator Interfaces 18
Status
The MUA II D controller status screens are accessed by pressing the
“Status” button on either the System Manager or the Modular Service
Tool. Following are the available status screens and a description of
their functions.
Status Screen 1
MUA II vx.xx IDxxxx
OCCUPIED
Vent Mode
Normal Operation
Line 2 Line displays one of the following:
Unoccupied Mode Remote Occupied
Occupied Mode Override Mode
Holiday Operations FORCED OCCUPIED
FORCED UNOCCUPIED FORCED OUTPUT
PUSH-BUTTON OVERRIDE
Line 3 Line displays one of the following:
Vent Mode Cooling Mode
Heating Mode Dehumidification
Line 4 Line displays one of the following:
Normal Operation
Fan Starting Delay
Status Screen 2
MUA II vx.xx IDxxxx
Supply Air: xxx.x
° F
Supply..Spt: xxx.x ° F
Line 2 - Current Supply Air Temperature
Line 3 - Current Supply Air Setpoint
Line 4 - Blank Line
Status Screen 3
MUA II vx.xx IDxxxx
Outdoor.Air: xxx.x
° F
Cooling.Spt: xxx.x ° F
Heating.Spt: xxx.x ° F
Line 2 - Current Outdoor Air Temperature
Line 3 - Current Cooling Mode Setpoint.
Line 4 - Current Heating Mode Setpoint
Status Screen 4
MUA II vx.xx IDxxxx
Dewpoint...: xxx.x
° F
Dewpnt..Spt: xxx.x ° F
Outdoor.RH.: xxx.x%
Line 2 - Current Outside Air Dewpoint
Line 3 - Current Dewpoint Setpoint
Line 4 - Current Outside Humidity
Status Screen 5
MUA II vx.xx IDxxxx
Enthalpy...: xx.xBTU
Enthlpy Spt: xx.xBTU
Enthalpy Db: xx.xBTU
Line 2 - Current Air Enthalpy
Line 3 - Current Enthalpy Setpoint
Line 4 - Current Enthalpy Deadband
Status Screen 6
MUA II vx.xx IDxxxx
Space..Temp: xxx.x
° F
Reset...Hum: xxx.x%
Line 2 - Current Reset Temperature reading
Line 3 - Current Reset Humidity reading
Line 4 - Blank Line
Status Screen 7
MUA II vx.xx IDxxxx
ModGas.Heat: xxx.x%
Mod..Reheat: xxx.x%
Extrnl Heat: xxx.x%
Line 2 - Current MODGAS II position
Line 3 - Current REHEAT II position
Line 4 - Current External Heat position
Programming The MUA II D Controller