Orion System OE742-XX-VAVZ - Manual (Page 6)

Form: ORION-OE282-ProportionalDamper Actuator-1C.doc
Page 1 of 1
Description
The Orion OE282 Damper Actuator is
a shaft mounted, floating point control
actuator. Actuators are 24VAC/24VDC
with a 10K ohm feedback signal for po-
sition monitoring. Wiring connection to
the actuator is by means of a modular
phone cable connector located on the
actuator cover. The actuator is rated for
35 in-lb of torque. All actuators are
electronically protected against over-
load. The angle of rotation is mechani-
cally limited to 95
. When the end posi-
tion of the actuator or damper is
reached, the actuator automatically
stops. For adjustment purposes, the
gears can be manually disengaged by
pushing the manual override button on
the actuator cover.
Applications
The OE282 Damper Actuator is used to
provide control of air volume dampers
in an Orion VAV or zoning systems.
When used in VAV and Zoning applica-
tions it is typically used in conjunction
with an OE324-00-VAVZ Zone control-
ler board.
Technical Data OE282
Damper Actuator
Power Supply 24VAC
 20% 50/60HZ Angle of Rotation Max. 95
, Adjustable
Life Cycle Rating 2.5 Million Cycles with Mechanical Stops
Power Consumption 3 VA Maximum Power Connection RJ-11 Modular Jack
Operating Temp -22
F to 122F Servicing Maintenance Free
Operating Humidity 5 to 95% RH Non-Condensing Quality Standard ISO 9001
Overload Protection Electronic Throughout 0 to 95

Rotation
Agency Listings UL873 listed
CSA 4813 02 Certified
Feedback Signal 10K ohm 1W Potentiometer Torque Minimum 35 in-lb
Running Time 80-110 Seconds. Weight 1.2 lb.
Three Year Warranty WattMaster reserves the right to change specifications without notice
OE282 - Damper Actuator