Draytek 2910 - Manual (Page 163)

Vigor2910 Series User’s Guide 157
either Mixed or WPA2 only in the field below. Since the
key will be auto-negotiated during authentication, the
field of key setting below will be not available for input.
WPA The WPA encrypts each frame transmitted from the radio
using the key, which either PSK entered manually in this
field below or automatically negotiated via 802.1x
authentication.
Type - Select from Mixed (WPA+WPA2) or WPA2 only.
Pre-Shared Key (PSK) - Either 8~63 ASCII characters,
such as 012345678..(or 64 Hexadecimal digits leading by
0x, such as "0x321253abcde...").
WEP 64-Bit - For 64 bits WEP key, either 5 ASCII characters,
such as 12345 (or 10 hexadecimal digitals leading by 0x,
such as 0x4142434445.)
128-Bit -
For 128 bits WEP key, either 13 ASCII
characters, such as ABCDEFGHIJKLM (or 26
hexadecimal digits leading by 0x, such as
0x4142434445464748494A4B4C4D).
All wireless devices must support the same WEP
encryption bit size and have the same key. Four keys can
be entered here, but only one key can be selected at a
time. The keys can be entered in ASCII or Hexadecimal.
Check the key you wish to use.